当前位置: 皇冠国际娱乐平台 > 包装案例 > 胶盒系列 > 包装纸盒制作的简单方法

包装纸盒制作的简单方法

日期:2017-11-01 10:09:07 浏览次数:1014

A lot of people like to make small gifts themselves, which needs to be packaged to give away. Here is a simple packaging paper box making method.
Steps:
1. Determine the size of small gifts. Use a ruler to measure the length, width and height of small gifts when necessary. If the small gift has an irregular shape, choose the maximum point measurement.
2. After setting the size of small gifts, determine the size of the carton. The area is converted from six surfaces and the spacing between the carton box and the small gift is determined.
3. Pay attention to the length and width of the carton, and it is necessary to know the loss of the upper port when sealing the box, so the port portion of the carton should be left out.
4. Now begin to cut, put the cardboard on the floor, can not have the pleats, use the ruler to measure the required size, use a pen to mark good, then use a ruler to press the cardboard, and cut with scissors.
5. Now make the box pressure line, according to the previous record, use ruler to measure the corresponding size on board. Then use the edge of the knife to cut the cardboard cuticle, pay attention to the strength, just a little scratches on the line, along the cardboard scratches to the line.
Fold along the long edge according to the pressure line. Then tape the two gaps of the carton to tape.
This way, the simple packaging paper box is basically finished.

很多人喜欢自己作些小礼品,这就需要配套包装才好送人。这里就分享一个简易包装纸盒制作方法
步骤
1、确定小礼品尺寸,必要时用尺测量小礼品长、宽、高然后记下。如果小礼品有着不规则的外形,则选最大点测量
2、定好小礼品大小后,再确定包装纸盒大小。由六面的面积换算,再加上包装纸盒和小礼品的间距确定需制作的面积
3、留意包装纸盒的长和宽,并且需知晓封箱时上端口要有损耗,所以包装纸盒上端口部分得留出余量
4、现在开始剪切,把纸板放地板上,不能有褶,用尺子量出所需尺寸,用笔标记好,然后用尺压着纸板,并用剪刀进行裁剪
5、现在做纸箱压线,依据先前记录的大小,使用尺在纸板上测出对应大小。之后用刀尖划开纸板表皮,注意力度,只需稍微有划痕就行,沿纸板划痕进行压线
6、沿长边根据压线进行折叠。之后把纸盒的两条缝隙用胶带进行粘接
这样,简易包装纸盒就基本制作完成了。

上一产品: 男士单个手表盒
XML 地图 | Sitemap 地图